Shoei Safety Helmet Corporation prides itself in producing the best helmets that technology will allow, and never before has that been more evident than with the all-new VFX-W. The absolute pinnacle of all off-road helmets, the VFX-W is the result of countless hours of conceptualization, R&D, and testing with the most hard-nosed critics of all of our professional racing team. Drenched with state of the art new features, no stone was left unturned during its development. With safety, performance, comfort, and styling all critical factors, the VFX-W is perfect in every detail, as it ushers in the future of helmet technology with the type of quality that only Shoei is known for. Features and Benefits AIM+ Shell Construction Shoei’s proprietary AIM+ technology. This process combines fiberglass with organic fibers that are so strong that they can only be cut with a laser. The end result is a stronger, lighter shell that will absorb and distribute the force of an impact safely and efficiently. Dual-Layer EPS Liner Ventilation System Dual layer liner yields enhanced impact absorption by adjusting thickness and density in key areas. Inner liner features air channels for efficient cooling. Impact-absorbing EPS liner throughout the entire chin bar. V-430 Sleek Visor Developed by Shoei’s sponsored riders. Lengthened for additional protection from sun and roost. Adjustment slot lengthened for greater versatility. Plastic hardware is utilized for easier visor breakaway during impact. Includes a matte black strip to reduce glare. 3D Max-Dry Liner System Polyurethane foam pads are three dimensionally formed for a perfect fit. Proprietary synthetic fiber absorbs and exhausts sweat 2X faster than conventional nylon. Liner is removable, adjustable, and washable. Emergency Quick Release System (EQRS) Mechanical tabs disengage cheek pads for easy removal by emergency medical personnel. Helmet can be removed with minimum load to rider in emergency situations. Ventilation System Improved air intakes are located in mouthpiece, forehead, and through scoops directing air into EPS liner. Seven exhaust ports dispel hot air from the rear of the helmet. Vent openings are covered by wire mesh to prevent dirt from entering liner. Sleek Mouthpiece Wire mesh screen helps prevent roost from entering the mouthpiece A strip of AIM+ shell material reinforces mesh screen and helps to reduce chances of larger intrusions. Sleek mouthpiece directs cooling air through a removable and washable foam filter.
The J-WING is simply the most functional open-face helmet in the world today. It combines Shoei?s trademark craftsmanship and safety features with the convenience that only an open-face helmet can provide. Whatever your cruising needs or preference, Shoei has a premium helmet with comfort, fit and features that will feel like it was made just for you. Features and Benefits Quick Release Base Plate System 3D Comfort Liner System Cheek Pad Slits for Eyeglasses Adjustable Top & Rear Vents AIM+ Shell Construction Dual EPS Liner Neck Outlet CJ-1 Shield Shield stopper Shell integrated spoiler Snell M2005
Building on the strongest pedigree in the motorcycle helmet business, Shoei is proud to introduce the all-new RF-1100. Since its 2003 inception, the RF-1000 has enjoyed great success, but that didn’t stop Shoei’s world-class development team from throwing out the molds to build a brand new helmet from scratch. Combining customer and dealer requests with advanced technology, modern testing practices, and 50 years of helmet-building experience, Shoei is pleased to deliver the finest sport-touring helmet that money can buy. The all-new, groundbreaking RF-1100, where aggressive styling meets Shoei?s unrivaled attention to detail, and the evolution of perfection is once again met. Features and Benefits Q.R.S.A. (Quick Release Self-Adjusting) Base Plate System Need to change from clear to tint? Shoei?s Quick Release Self-Adjusting (QRSA) base plate system includes a locking mechanism that allows you to do just that in a snap. No tools, no hassle, no problems Building on the successful QRBP, the QRSA maintains its predecessor’s easy-to-use features, like the simple shield release and attachment, and shield preset lever, but offers a significant advantage. Shoei’s patented new spring loaded technology featured in the QRSA eliminates the need to adjust base plates for proper sealing. Every time the shield is lowered, the spring-loaded base plates pull the shield back to contact the window beading evenly, ensuring a wind and waterproof seal CW-1 Shield The all-new CW-1 shield is both wider and taller than the CX-IV that it replaces. In addition, the CW-1 shield protects Shoei riders from 99% of the sun’s damaging UVA and UVB rays, and the three-dimensional injection-molding process ensures distortion free vision Ability to work in conjunction with Shoei’s optional Pinlock system to deliver fog-free vision in even the most challenging conditions. The new CW-1 Pinlock lens is larger, and offers fog-free viewing to the very top of the helmet’s larger eye port AIM+ Shell Construction (Snell M2010 Approved) Shoei’s proprietary AIM+ technology combines fiberglass with organic fibers that are so strong they can only be cut with a laser. The end result is a stronger, lighter shell that will absorb and distribute the force of an impact safely and efficiently 5 Shell Sizes While some of Shoei’s competitors rely on foam padding for fitting a wide range of customers, Shoei offers an industry-leading five shell sizes to ensure a custom fit for heads between the sizes of XS-2XL Shell-Integrated Spoiler This new technology has allowed Shoei to incorporate the aerodynamic advantages of a spoiler into the shell of the helmet, while maintaining consistent shell thickness to guarantee proper strength and weight This shell-integrated spoiler works to reduce lift during high-speed riding, just like the spoiler on a sports car Variable Ventilation System Three intake and six exhaust vents in total Better ventilation and aerodynamic performance is achieved by sep
Shoei RF-1000 helmets offer a unique Aero Stabilizing system and high performance materials, in addition to an anti-fogging technology and race replica graphics. Features and Benefits Aerodynamic Shell Design maximized through extensive wind tunnel and rider testing. The Aero Stabilizer dramatically reduces drag and lift coefficients, thus diminishing rider fatigue and increasing performance. Two-Layer EPS Liner System offers unmatched ventilation with internal channels and exhaust ports throughout the helmet. Integrated Upper Air Intake minimizes air turbulence and maximizes air stream in all riding positions. Outlet holes in the Aero Stabilizer allow warm air to be exhausted. The lower air intake provides an additional source of air flow. The neck outlet vent allows for effective air exhaust. Lightweight, Advanced Integrated Matrix Plus (AIM+) equals high performance fiber materials combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient. Anti-Fog System features lower air intake provides air flow that helps to diminish shield fog. Removable interior cheek pads available in optional sizes for a custom fit. Chin strap cover can easily be removed to allow for cleaning or replacement. Q.R.B.P. (Quick -Release Base Plate) allows tool-less shield removal. Wide, 3-dimensionally curved shield offers increased peripheral vision and optical clarity. Scratch-resistant coating. 100% protection form harmful UV A & B rays. A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly. Weight: 3.28 lbs./1490 grams(approx.)
Shoei RF-1000 Diabolic Zero Helmet Aerodynamic Shell Design Hyper Dual-Liner II Ventilation System Lightweight Advanced Integrated Matrix AIM Anti-Fog System 3D Full Support Interior Type 3 Standard Chin-Strap Clip CX-1 V Shield and Lock System Scratch-resistant coating 100 protection from harmful UV A B rays A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly Standards: DOT 218 Snell-M2000 Construction: AIM Advanced Integrated Matrix materials Weight: 3.2 lbs 1450 grams approx. **Closeouts are limited to stock on hand**
Building on the strongest pedigree in the motorcycle helmet business, Shoei is proud to introduce the all-new RF-1100. Since its 2003 inception, the RF-1000 has enjoyed great success, but that didn’t stop Shoei’s world-class development team from throwing out the molds to build a brand new helmet from scratch. Combining customer and dealer requests with advanced technology, modern testing practices, and 50 years of helmet-building experience, Shoei is pleased to deliver the finest sport-touring helmet that money can buy. The all-new, groundbreaking RF-1100, where aggressive styling meets Shoei?s unrivaled attention to detail, and the evolution of perfection is once again met. Features and Benefits Q.R.S.A. (Quick Release Self-Adjusting) Base Plate System Need to change from clear to tint? Shoei?s Quick Release Self-Adjusting (QRSA) base plate system includes a locking mechanism that allows you to do just that in a snap. No tools, no hassle, no problems Building on the successful QRBP, the QRSA maintains its predecessor’s easy-to-use features, like the simple shield release and attachment, and shield preset lever, but offers a significant advantage. Shoei’s patented new spring loaded technology featured in the QRSA eliminates the need to adjust base plates for proper sealing. Every time the shield is lowered, the spring-loaded base plates pull the shield back to contact the window beading evenly, ensuring a wind and waterproof seal CW-1 Shield The all-new CW-1 shield is both wider and taller than the CX-IV that it replaces. In addition, the CW-1 shield protects Shoei riders from 99% of the sun’s damaging UVA and UVB rays, and the three-dimensional injection-molding process ensures distortion free vision Ability to work in conjunction with Shoei’s optional Pinlock system to deliver fog-free vision in even the most challenging conditions. The new CW-1 Pinlock lens is larger, and offers fog-free viewing to the very top of the helmet’s larger eye port AIM+ Shell Construction (Snell M2010 Approved) Shoei’s proprietary AIM+ technology combines fiberglass with organic fibers that are so strong they can only be cut with a laser. The end result is a stronger, lighter shell that will absorb and distribute the force of an impact safely and efficiently 5 Shell Sizes While some of Shoei’s competitors rely on foam padding for fitting a wide range of customers, Shoei offers an industry-leading five shell sizes to ensure a custom fit for heads between the sizes of XS-2XL Shell-Integrated Spoiler This new technology has allowed Shoei to incorporate the aerodynamic advantages of a spoiler into the shell of the helmet, while maintaining consistent shell thickness to guarantee proper strength and weight This shell-integrated spoiler works to reduce lift during high-speed riding, just like the spoiler on a sports car Variable Ventilation System Three intake and six exhaust vents in total Better ventilation and aerodynamic performance is achieved by sep
Shoei VFX-DT Preston 2 Helmet Advanced Integrated Matrix Plus AIM+ construction combines high performance fibers with organic fibers to create a shell structure that is lightweight rigid and resilient Increased fit options that help to comfortably fit most head sizes Aerodynamic properties are maximized through extensive wind tunnel and rider testing Adjustable front intake vents combine with rear Extractor Vents and a neck outlet vent to maximize flow-through ventilation A semi-dual EPS liner with air channels allows directed airflow to the helmet interior Cool air passes through the front intake vents cools the helmet interior and is exhausted through the rear Extractor Vents by the force of negative air pressure The helmet interior is constructed with a comfortable Max-Dry material that easily absorbs and discharges moisture build up The 3-D Max-Dry removable liner system is thermo-molded to match the liner perfectly to the helmet interior The cheek pads upper liner and chinstrap covers are easily removed for cleaning and or replacement The removable cheek pads are available in optional sizes so that each rider can personalize their fit Aggressively shaped Cross Visor provides incredible airflow for reduced drag Cross visor is easily installed or removed with the use of three external screws for ease of access to center screw and tightening by hand No-clog Cross Nose Cover for enhanced flow-through ventilation Removable washable and replaceable Cross Nose Cover Filter Unique chin strap clip keeps strap from flapping in the wind Ergonomically shaped mud guard Helmet sack constructed of soft velvety fabric with drawstring closure DOT-218 and SNELL-M2000 approved Approx. 3.28 lbs 1490 grams **Closeouts are limited to stock on hand**
Since its introduction in 1985, the RJ series has set the standard by which all open-face helmets are measured. Shoei’s latest offering in the RJ line, the RJ Platinum R, continues to build upon the RJ family legacy. It unites incredible comfort with the very latest in safety and performance technology. The result is a new, modern design that raises the bar. The Shoei RJ Platinum R: The new standard for open-face helmets. Features and Benefits Lightweight, Advanced Integrated Matrix Plus (AIM+) shell is ultra-lightweight, rigid, and resilient Adjustable top intake and rear exhaust vents A dual-layer liner allows for smooth passage of air, improving cooling performance Exclusive, distinctive Open-Road visor Soft and comfortable 3D liner Removable and washable interior for easy care Communication-system compatible Padded chinstrap Specifications Certifications: DOT 218; Snell M2005 Weight (approx.): 2.86 lbs. / 1300 g
Building on the strongest pedigree in the motorcycle helmet business, Shoei is proud to introduce the all-new RF-1100. Since its 2003 inception, the RF-1000 has enjoyed great success, but that didn’t stop Shoei’s world-class development team from throwing out the molds to build a brand new helmet from scratch. Combining customer and dealer requests with advanced technology, modern testing practices, and 50 years of helmet-building experience, Shoei is pleased to deliver the finest sport-touring helmet that money can buy. The all-new, groundbreaking RF-1100, where aggressive styling meets Shoei?s unrivaled attention to detail, and the evolution of perfection is once again met. Features and Benefits Q.R.S.A. (Quick Release Self-Adjusting) Base Plate System Need to change from clear to tint? Shoei?s Quick Release Self-Adjusting (QRSA) base plate system includes a locking mechanism that allows you to do just that in a snap. No tools, no hassle, no problems Building on the successful QRBP, the QRSA maintains its predecessor’s easy-to-use features, like the simple shield release and attachment, and shield preset lever, but offers a significant advantage. Shoei’s patented new spring loaded technology featured in the QRSA eliminates the need to adjust base plates for proper sealing. Every time the shield is lowered, the spring-loaded base plates pull the shield back to contact the window beading evenly, ensuring a wind and waterproof seal CW-1 Shield The all-new CW-1 shield is both wider and taller than the CX-IV that it replaces. In addition, the CW-1 shield protects Shoei riders from 99% of the sun’s damaging UVA and UVB rays, and the three-dimensional injection-molding process ensures distortion free vision Ability to work in conjunction with Shoei’s optional Pinlock system to deliver fog-free vision in even the most challenging conditions. The new CW-1 Pinlock lens is larger, and offers fog-free viewing to the very top of the helmet’s larger eye port AIM+ Shell Construction (Snell M2010 Approved) Shoei’s proprietary AIM+ technology combines fiberglass with organic fibers that are so strong they can only be cut with a laser. The end result is a stronger, lighter shell that will absorb and distribute the force of an impact safely and efficiently 5 Shell Sizes While some of Shoei’s competitors rely on foam padding for fitting a wide range of customers, Shoei offers an industry-leading five shell sizes to ensure a custom fit for heads between the sizes of XS-2XL Shell-Integrated Spoiler This new technology has allowed Shoei to incorporate the aerodynamic advantages of a spoiler into the shell of the helmet, while maintaining consistent shell thickness to guarantee proper strength and weight This shell-integrated spoiler works to reduce lift during high-speed riding, just like the spoiler on a sports car Variable Ventilation System Three intake and six exhaust vents in total Better ventilation and aerodynamic performance is achieved by sep
Whether you’re cruising, touring, or sport riding, it’s hard to beat the comfort and protection of the TZ-R. Using technology developed for Shoei’s racing and performance models, the TZ-R’s aerodynamics reduce wind noise and increase stability. The newest member of Shoei’s full-face family, the TZ-R, comes with a full Shoei pedigree. Extensive hours of wind tunnel and real-world testing refined it’s shape and features. All elements are uniquely Shoei; Aim+ shell construction for strength, removable cheek pads for fit and comfort, and a distortion free CX-1V shield and Quick Release Base Plate System for unobstructed visibility. Shoei?s commitment to performance excellence, at a surprisingly affordable price the TZ-R has it all. Features and Benefits Quick Release Base Plate System. Upper Air Intake. Lower Air Intake. Face Shield Defogging Vent. Removable / Replaceable cheek pad and chinstrap covers. Preset Shield Opening Lever With Locking Mechanism. CX-1V Shield. AIM + Shell Construction. Snell M2005. Dual liner ventilation system. 3D Comfort liner. Shell integrated spoiler.
